|Place of Origin:||China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||1 pc/box|
|Payment Terms:||T/T, MoneyGram, Western Union|
|Supply Ability:||100 pcs/month|
|Product Name:||Hair Removal Machine||Model:||Vertical|
|Color:||White||Function:||Remove Body Hair|
|Version:||3 IN 1||Feature:||Portable|
vertical 3 in 1 ipl machine,
3 in 1 ipl machine 37kg,
portable laser hair removal machine 37kg
3 IN 1 DPL Beauty Machine Protable vertical hair removal machine
DPL Introduction of Laser Hair Removal Machine
The core technology of the DPL skin beauty instrument is mainly three points: radio frequency + light energy + epidermal cooling, which fully combines the respective advantages of light energy (IPL) and (RF) radio frequency, and uses the skin's selective absorption of light energy to cause target tissue and normal. The impedance difference of the skin strengthens the absorption of radio frequency by the target tissue under the condition of low light energy intensity, so that the tissue reaches the ideal temperature rise. Radiofrequency penetrates deep into the skin and is not selectively absorbed, and its conductivity in the skin is closely related to temperature. E-light reputation skin meter combines the advantages of light energy and radio frequency, and uses the skin's selective absorption of light energy to enhance the absorption of radio frequency by skin tissue. At the same time, the radio frequency surface contact cooling technology eliminates the discomfort and complications caused by the heat effect of strong light and strong, and has a breakthrough improvement in efficacy and safety.
DETAILS of Laser Hair Removal Machine
|Product name||3 IN 1 DPL|
Operating procedures of Laser Hair Removal Machine
1) start up:Open the instrument power switch, the instrument display light, the system circuit immediately into the self-test state, the operator in this case should allow the instrument to run their own 5 minutes before proceeding.
Note: If the power switch is turned on and the display is still off, check that the emergency stop switch is reset. Rotate the emergency stop switch in the correct direction to reset the emergency stop switch. The instrument enters the standby mode.
2) Preheating:Preheat the instrument for at least three minutes, do not turn on the lights.
Purpose: to fully circulate the water in the water pipe, so as to avoid the smooth circulation of many times caused by bald gun phenomenon, to ensure the safety of operation.
3) shave:Scrape off the face of excess hair, forehead, eyebrows, two sideburns, cheeks, lips and other hair. (Two minutes)
Purpose: hair is black, the operation will absorb part of the black light, the skin will absorb the light will be reduced, reducing the nursing effect; black hair absorption process will increase the care of the tacit taste, so to scratch the hair ; If not scrape the hair, absorb the light of the small fluff will remain in the skin epidermis part of the heat, may increase the skin's sensitivity.
4) Coated with gel:
In the care items, care parts must be evenly coated 2-3mm thick cold gel (two minutes) (If the hair removal project need to scratch the hair (slightly stay a little) and then coated with cold gel).
Role: cold gel is a light guide agent, a town net, cooling, light guide the role. Cold gel is forbidden to be used repeatedly.
Taboo: coated with cold gel to avoid the eyes, eyebrows, lips, which belong to the forbidden area.
5) Eye protection:Require the caregiver to close his eyes and cover the eyes with wet cotton or professional goggles.
Role: to avoid the caregiver to see the light and tension, play a role in appeasement.
6) Check allergy:Adjust the safety parameters at the ear root to do two to three spots, observe the three minutes.
Action: Do not continue to operate.
7) Operating:Reconfigure the parameters for the order of the operation. (Twenty minutes or so)
8) Fumian:After the end of the operation will be cold gel to stay in the face for about 20 minutes, if the care after a larger reflection, red holding time longer cold water or ice water can be applied to the red.
9) Cleaning:With cold water cleaning care parts of the cold gel, apply care after repair products
a)Care of pigment problems, the first seven days of non-alcoholic products to pay the essence of water and repair the original 7 days, seven days after the evening to continue to repair the essence of repair, other skin care products normal.
b)Care of general skin problems, the first seven days of repair repair water products 7 days, seven days later at night other skin care products normal.
Contact Person: Aissa